Empower Tip: Data Acquisition and the Sample Set Method

Tip #12: Saving an instrument method with a method set

To inject a sample or run a Sample Set Method, we need a Method Set that contains an Instrument Method.

From the Pro Interface select Configure the System.

Select a project from the list and click OK.

Select the Methods tab.

Right-click in the table and select New Method, Instrument Method.

If you have more than one chromatographic system, select the one you wish to create the new Instrument Method for and click OK.

Enter the parameters for the new Instrument Method and from the File menu select Save with Method Set.

Enter a name for the new Instrument Method, any pertinent comments and click Save.

Empower then prompts you to enter a name for the Method Set. Enter the name, any pertinent comments and click Save.

We now see the new instrument Method and Method Set in the Methods table.

1. You must log into Empower with the Pro Interface to take advantage of this feature.

2. You can also do this from the Run Samples window by clicking Edit under the Instrument Method field and following steps 6 thru 9 outlined above.

Serve Aiuto? Contattate un esperto Waters.