Do you want Empower Tips sent to your inbox each week?

Subscribe Now

Empower Tip: Data Acquisition and the Sample Set Method

Tip #12: Saving an instrument method with a method set

To inject a sample or run a Sample Set Method, we need a Method Set that contains an Instrument Method.

Step 1

From the Pro Interface select Configure the System.

Step 2

Select a project from the list and click OK.

Step 3

Select the Methods tab.

Step 4

Right-click in the table and select New Method, Instrument Method.

Step 5

If you have more than one chromatographic system, select the one you wish to create the new Instrument Method for and click OK.

Step 6

Enter the parameters for the new Instrument Method and from the File menu select Save with Method Set.

Step 7

Enter a name for the new Instrument Method, any pertinent comments and click Save.

Step 8

Empower then prompts you to enter a name for the Method Set. Enter the name, any pertinent comments and click Save.

Step 9

We now see the new instrument Method and Method Set in the Methods table.

Final Notes

1. You must log into Empower with the Pro Interface to take advantage of this feature.

2. You can also do this from the Run Samples window by clicking Edit under the Instrument Method field and following steps 6 thru 9 outlined above.

About the Author

Neil Lander

Neil provides internal support for Empower CDS software and is focused on developing laboratory software solutions that help organizations achieve their scientific and operational objectives.

您需要帮助吗？联系沃特世专家。

创建支持请求

向沃特世寻求帮助